Attach parts to the middle plate
You will also need the parts you assembled in previous sections.
Step 1: Screw into the focusing assembly
- Attach the middle plate to the focusing mechanism using 3 M3x10mm cap head screws.
- Use a 2.5mm ball-ended hex key to turn the screws.
Step 2: Attach the small standoffs
- Insert a M3 nut into the nut trap of the standoff (using the nut insertion tool). Do the same for the four standoffs.
- Insert a M3x15mm cap head screw into each small standoff using the large hole that comes out the side of the standoff. The screw should poke out the end of the part as shown.
- Use a 2.5mm ball-ended hex key to turn the screw.
- Attach each small standoff to one of the corners of the middle plate.
- Use the nut insertion tool and the 2.5mm ball-ended hex key to secure the three parts together